● Up to 22A PV input current perfect for high power modules
● Outputs high quality pure sine wave AC power
● 8-10kW load power to meet the needs of most households
● Industrial design with a modern aesthetic look
● Easy to install and simple to use
● Up to 6pcs in parallel
● Both split phase and three phase parallel options
● Solar Charger Controller up to 200A charging current
● Support for Li-ion battery BMS communication
● Exclusive Li-ion battery BMS dual activation
● Time-slot function to save cost with peak-valley tariff

SPI series is a solar hybrid inverter integrating solar energy storage, mains charging energy storage, and AC sine wave output. It adopts DSP control and state-of-art control algorithm, ensuring high response speed, high reliability, and high industrialization standards.

With dual MPPT, the efficiency is up to 99.9%. A maximum PV input current of 22A is perfect for high power modules.

This SPI inverter has 4 charging modes: Solar Only, Mains Priority, Solar Priority, and Mains & Solar Charging. And there are 2 output modes, Inverter and Mains Power, to give you seamless power supply. With time-slot charging and discharging setting function, this inverter can help to save on your electricity bill.
Specifications
|
Model |
SPI-8K-U | SPI-10K-U | SPI-8K-S | SPI-10K-S | CAN BE SET |
| INVERTER OUTPUT | |||||
| Rated Output Power | 8,000W | 10,000W | 8,000W | 10,000W | |
| Max.Peak Power | 16,000W | 20,000W | 16,000W | 20,000W | |
| Rated Output Voltage | 120/240Vac(L1/L2/N/PE split phase) | 230Vac(single-phaseL/N/PE) | Y | ||
| Load Capacity of Motors | 5HP | 6HP | 5HP | 6HP | |
| Rated AC Frequency | 50/60Hz | Y | |||
| Waveform | Pure Sine Wave | ||||
| Switch Time | 10ms(typical) | ||||
| Parallel capacity | / | ||||
| BATTERY | |||||
| Battery Type | Li-ion / Lead-Acid / User Defined | Y | |||
| Rated Battery Voltage | 48Vdc | ||||
| Voltage Range | 40-60Vdc | Y | |||
| Max.MPPT Charging Current | 200A | Y | |||
| Max.Mains/Generator Charging Current | 100A | 120A | 100A | 120A | Y |
| Max.Hybrid Charging Current | 180A | 200A | 180A | 200A | Y |
| PV INPUT | |||||
| Num. of MPP Trackers | 2 | ||||
| Max.PV array power | 11,000W | 5,500W + 5,500W | |||
| Max.input current | 22/22A | 22A+22A | |||
| Max.Voltage of Open Circuit | 500Vdc | 500Vdc + 500Vdc | |||
| MPPT Voltage Range | 125-425Vdc | ||||
| MAINS / GENERATOR INPUT | |||||
| Input Voltage Range | 90-140Vac | 90~270Vac | |||
| Frequency Range | 50/60Hz | ||||
| Bypass Overload Current | 63A | ||||
| EFFICIENCY | |||||
| MPPT Tracking Efficiency | 99.9% | ||||
| Max. Battery Inverter Efficiency | 92% | ||||
| GENERAL | |||||
| Dimensions | 620*435*130mm(2*1.4*0.4ft) | ||||
| Weight | 20kg(44lb) | 21kg(46.3lb) | 27kg | ||
| Protection Degree | IP20, Indoor Only | ||||
| Operating Temperature Range | -15~55℃, >45℃ derated(5~131℉, >113℉ derated) | ||||
| Noise | <60dB | ||||
| Cooling Method | Internal Fan | ||||
| Warranty | 2 Years | ||||
| COMMUNICATION | |||||
| Embedded Interfaces | RS485 / CAN / USB / Dry contact | Y | |||
| External Modules (Optional) | Wi-Fi / GPRS | Y | |||
| CERTIFICATION | |||||
| Safety | IEC62109-1, IEC62109-2,UL1741 | IEC62109-1, IEC62109-2 | |||
| EMC | EN61000-6-1, EN61000-6-3, FCC 15 class B | ||||
| RoHS | Yes | ||||
Schematic Diagram

Split Phase Voltage Range

| Items | Description |
| Applicable Model | SPI Series |
| Output Voltage Range (L-N) | 100~120Vac, 120Vacdefault |
| Output Voltage Range (L-L) | 200~240Vac, 240Vacdefault |